Temp maxes at 220C

helping you get the most out of your RigidBot extruder

Temp maxes at 220C

Postby n8080 » 16 Aug 2014, 17:52

I can't figure this out. My extruder temp is maxing out and regulating at 220C +/- 1C even though my settings in the RB LCD and in my Cura gcode file are for 230C. I believe this temp limit started happening after the latest firmware upgrade. Any ideas?
n8080
 
Posts: 4
Joined: 03 Aug 2014, 00:20
Location: Palos Verdes Estates, CA, USA

Re: Temp maxes at 220C

Postby mavgrab302 » 05 Sep 2014, 12:26

After the latest firmware mine went from 230 to 200..but has always responded to either lcd or cura what I wanted it to do..I have no idea..
mavgrab302
 
Posts: 65
Joined: 17 Aug 2014, 04:06
Location: conroe,tx

Re: Temp maxes at 220C

Postby n8080 » 05 Sep 2014, 15:10

My problem was the printer wouldn't start going until the temp hit what Cura was looking for so I would increase my temp manually through the LCD screen to 240 to get it to 230. This lasted for a few days and now, for whatever reason, it's working just fine. Very strange.
n8080
 
Posts: 4
Joined: 03 Aug 2014, 00:20
Location: Palos Verdes Estates, CA, USA


Return to Extruders

Who is online

Users browsing this forum: No registered users and 1 guest
cron