RBB3-XL Name Plate

Troubleshooting for the mechanical elements of the RigidBot

RBB3-XL Name Plate

Postby williamhawk » 23 Sep 2017, 09:43

I use Blue painters tape put down on an aluminum bed washed with Windex. This makes the tape stick really well and produces very flat parts with no warping or tape pulling up. Start with the bed at 60C for PLA and at layer height 0.5mm turn it down to 45. This will keep the upper layers from warping the base. Run the first layer at about 15mm/sec to capture the fine outline detail of the logo letters. The rest of the print can be run at 40 - 60mm/sec.

I didn't find the right solution from the Internet.


References https://www.thingiverse.com/thing:2417695

Product Video
williamhawk
 
Posts: 60
Joined: 09 Sep 2017, 12:18

Return to Mechanical

Who is online

Users browsing this forum: No registered users and 1 guest
cron