Mintemp

Troubleshooting any electronic elements of the RigidBot

Mintemp

Postby John » 04 Mar 2015, 07:50

My LCD gives me the error "mintemp". I asked tech support and was sold a new thermistor which I installed to no avail. Tech support no longer responds. Anyone got any ideas? This was after the failure of the EXTRUDER stepper mother which I replaced, breaking the fan in the process (also replaced) only to end up stuck with this "mintemp" error. Printer was working fine until the EXTRUDER motor gave out.
John
 
Posts: 2
Joined: 04 Mar 2015, 03:45

Re: Mintemp

Postby mikeandrews » 31 Dec 2015, 18:11

I have same problem now. Anybody give you a fix? Pronterface tells me to fix thermistor which I did and send a M999 code to RB. I dont know how. Do you?
mikeandrews
 
Posts: 3
Joined: 28 Dec 2015, 22:13

Re: Mintemp

Postby John » 01 Jan 2016, 00:38

I replaced thethermister and fiddled around in other ways I cannot remember and am now up and running. I think re booting everything was important. Sorry to be so vague, but the new parts including thermistor, fan, and extruder nozzle seemed to fix my problems. Getting the assembly exactly right and everything seated firmly was important. Good luck
John
 
Posts: 2
Joined: 04 Mar 2015, 03:45


Return to Electronics

Who is online

Users browsing this forum: No registered users and 2 guests
cron